Presetting Channels - Sony SLV-AV100C Operating Instructions Manual

Presetting channels

(Skip this section if you are
using cable box/DSS receiver
control.)
This unit's VCR is capable of receiving VHF channels 2 to 13, UHF
channels 14 to 69 and unscrambled CATV channels 1 to 125. First, we
recommend that you preset the receivable channels in your area using
automatic presetting. Then, if there are any unwanted channels, disable
them manually. If you have decided which channels you wish to preset,
set them directly using manual presetting.
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the VCR channel (channel 3 or 4). If your TV is
connected to the VCR using V connections, set the TV to video input.
• Press TV/VTR to display the VTR indicator in the VCR's display
window.
• Press VHS TUNER so that a channel number appears in the VCR's
MENU
display window.
EXECUTE
Presetting all receivable channels automatically
CURSOR
>/./?//
1 Press MENU. Then press CURSOR >/. to move the cursor (I) to
VHS MENU, and press EXECUTE.
2 Press CURSOR >/. to move the cursor (I) to TUNER PRESET and
press EXECUTE.
When using the EASY SET UP procedure, skip this step.
TUNER PRESET
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
SELECT CH
ADD / ERASE :
3 • To preset cable TV channels:
Press CURSOR ?// to set ANTENNA/CABLE to CABLE.
TUNER PRESET
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
SELECT
SET
• To preset VHF and UHF channels:
Press CURSOR ?// to set ANTENNA/CABLE to ANT.
TUNER PRESET
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
SELECT
SET
CH2
ANT CABLE
ADD ERASE
ON OFF
: 0 – 9 , ENTER
CH1
ANT CABLE
ADD ERASE
ON OFF
:
:
CH2
ANT CABLE
ADD ERASE
ON OFF
:
:
continued
Getting Started
39