Adjusting The Playback Speed - The Dpc Function - Sony IC RECORDER ICD-SX750 User Manual

To resume normal playback

Press .
To stop A-B Repeat playback

Press (stop).
To change the segment specified
for A-B Repeat playback
During A-B Repeat playback, press
(repeat) A-B/ again to specify a new
starting point A. Then specify a new
finishing point B, as in step 2.

Notes
You cannot set point A and point B at

the very beginning (0.5 seconds from the
beginning) or at the very end (0.5 seconds
prior to the end) of the message.
You cannot set point A and point B near a

bookmark you have set (0.5 seconds before
or after the bookmark).
Adjusting the
Playback Speed – the
DPC Function
When you slide the DPC (Digital Pitch
Control) switch to "ON, " you can adjust
the playback speed between +200% and
–75% of normal speed in the menu.
The message is played back in natural
tones by the digital processing function.

 , 

DPC
/MENU

GB