Adding A Recording To A Previously Recorded Message - Sony IC RECORDER ICD-SX750 User Manual


Notes
You need a certain amount of free space in

the memory to divide a message. For more
information, see "System Limitations" on
page 123.
If 999 messages have been recorded in a

folder, you cannot divide a message in that
folder.
Once a message is divided, you cannot

re-combine the divided messages using the
IC recorder.
You cannot divide a message at the very

beginning (0.5 seconds from the beginning)
of the message.
When you divide a message into two, at the

point of division, the end of the first message
and the beginning of the second message
may be interrupted.
During synchronized recording (page 50),

you cannot divide a message.
If you divide messages too frequently while

the unit is recording them, the following
phenomenon may occur: The operation
indicator keeps flashing, and you cannot
operate the unit for a certain period. This is
not a malfunction. Wait until the operation
indicator goes off.

GB
Adding a Recording to
a Previously Recorded
Message
When "ADD/OVERWRITE" in the menu
is set to "ADD, " you can add a recording
to the message being played back. The
added recording will be placed after the
current message, and will be counted as
a part of the message.
Operation
indicator



 , 
/MENU