When Replacing/Charging The Batteries - Sony IC RECORDER ICD-SX750 User Manual

For details on disconnecting the
IC recorder, refer to the operating
instructions supplied with your
computer.
Tips

You can charge the rechargeable batteries

by connecting the IC recorder to an AC
outlet using a USB AC adaptor (not supplied)
(page 125).
When replacing the batteries, messages

recorded or alarm settings are not erased
even when you remove the batteries.
When replacing the batteries, the clock

continues moving for a certain period of
time after you remove the batteries.

Notes
While " " or "

of the battery indicator, you cannot charge
the batteries. Charge the batteries in an
environment with a temperature of 5 °C
- 35 °C (41 °F - 95 °F).
If "USB CHARGE" in the "DETAIL MENU"

menu is set to "OFF, " you cannot charge the
batteries using your computer. Set "USB
CHARGE" to "ON" (page 92).
During playback using the internal speaker,

you cannot charge the batteries.
When you use the IC recorder with

rechargeable batteries, the battery indicator
may not light fully.
You cannot charge the batteries of your IC

recorder while your computer is in the sleep
mode, even if the computer is turned on.
1
GB
" is flashing instead
When replacing/charging
the batteries
The battery indicator on the display
shows the battery condition.
Battery remain indication
: Replace the old batteries with new
ones or charge the rechargeable
batteries.

: "LOW BATTERY" appears and the IC
recorder will stop operation.
You cannot use manganese batteries.