Help Guide | Adjusting The Playback Speed And Tones – The Dpc Digital Pitch Control) And The Key Control Function - Sony ICD-SX733 Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-SX733/SX734/SX1000
Back Back to Top
Adjusting the playback speed and tones – the DPC
(Digital Pitch Control) and the key control function
You can adjust the playback speed in a range from 0.25 times to 3.00 times. The
file is played back in natural tones by means of a digital processing function.
Moreover, you can adjust the playback sounds in semitones higher or lower, each
in 6 steps. This is useful for practicing songs to recorded accompaniment.
You can also change the playback speed while the "Transcription Playback Mode" is
active.
1. Slide the DPC (SPEED)/KEY CTRL switch to "ON."
2. During playback, press
3. Press or to adjust the playback speed.
The speed decreases by 0.05 times (from ×0.25 to ×1.00).
The speed increases by 0.10 times (from ×1.00 to ×3.00).
When you press and hold each button, you can change the speed continuously.
The playback speed is set to "×0.70" when you purchase the IC recorder.
4. Press or to adjust the playback tone (key control).
The playback tone is adjusted by a halftone higher ( 1 -
The playback tone is adjusted by a halftone lower ( 1 -
The playback tone is set to "0" when you purchase the IC recorder.
A: Current setting
B: DPC setting
C: Key control setting
5. Press to exit the setting mode.
Note
or to enter the DPC setting mode.
Search
Print
6).
6).
162