Working Instruction, Mechanical
4.1.2 Flex Assembly
Use tweezers to press the Flex Assembly through the hinge
hole. Use your fingers to carefully pull out the Flex film from
the other side
Note the position of the Dummy Hinge before installation
Use your fingers to press the Dummy Hinge into place
M
F
AKE SURE THAT THE
LEX FILM IS POSITIONED CORRECTLY IN
!
THE HINGE HOLE
Insert Flex Assembly into two snaps close to the Camera
3/000 21-1/FEA 209 544/121 A
43(54)
©
Company Internal
Sony Ericsson Mobile Communications AB