Stroller Assembly; Important Notes - Britax Steelcraft Zapo Manual

STROLLER ASSEMBLY

OPENING THE STROLLER FRAME
PLEASE REFER TO PAGE 4 FOR SMART LIFTING TECHNIQUES.

IMPORTANT NOTES:

• RELEASE THE STORAGE LATCH WITH DUE CARE AND OPEN THE
FRAME.
• WHEN OPENING THE STROLLER, BE AWARE OF THE DANGER OF
BEING INJURED BY MOVING PARTS AND LOCKING DEVICES DURING
THE PROCESS. KEEP ALL HANDS AND LIMBS CLEAR OF THESE
PARTS.
• THERE IS POTENTIAL FOR FINGERS OR PARTS OF THE BODY TO BE
INJURED WHEN THE STROLLER IS BEING UNFOLDED, DUE CARE
SHOULD BE EXERCISED.
• KEEP CHILDREN CLEAR OF THE STROLLER WHEN UNFOLDING THE
STROLLER.
• OPEN THE STROLLER SLOWLY AND BE CAREFUL WHERE YOU PLACE
YOUR HANDS.
OPENING THE STROLLER FRAME
A Stand the frame on its side. Hold the stroller with one hand and with
the other hand release the storage latch.
B With each hand holding the front and rear leg frames continue to
open the frame until the stroller frame is completely upright. You
should hear a 'click' which indicates the frame is securely locked.
C The handle is folded down flat against the backrest. Raise the handle to
the upright position by pressing in the adjuster buttons on the inside
of each handle moulding at the same time and lifting the handle
upwards until it makes a 'click' and locks into position.
See Page 7 for photos of each of the above steps.
06