Britax Stroller Modes; Stroller Assembly; Unfolding The Stroller Frame; Installing The Front Wheels - Britax Brook User Manual

Britax Stroller Modes

WARNING!
• Do not exceed maximum weight limits defined in the infant car
seat or accessory user guide.
Parent Facing/
Rear-Facing Forward-Facing
Infant Car
Seat Modes
• Compatible Britax infant car
seat can be installed parent
facing/rear-facing or forward-
facing. See page 24 for
information about compatibility.
• Other compatible car seats
MUST be installed parent facing/
rear-facing. See page 24 for
information about compatibility.
6
Toddler Seat
Modes
Parent Facing/
Forward-Facing
Rear-Facing

Stroller Assembly

Unfolding the Stroller Frame

1. Lift the frame lock and open
the frame.
2. Lift handle until frame locks
into upright position.
NOTE: After stroller is upright,
push down on handle to make
sure frame is locked in open
position.

Installing the Front Wheels

1. Slide front wheel mounting
pin into the housing on the
frame until they lock into place.
Repeat on the other side.
2. Pull wheel to ensure that it is
secure.
1
2
1
7