Related Manuals for Britax STRIDER PLUS - ANNEXE 534
Summary of Contents for Britax STRIDER PLUS - ANNEXE 534
- Page 1 IMPORTANT: KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE. Note: Second Seat, Bassinet, Infant Carrier and Footmuff are all sold separately. www.striderplus.com.au...
-
Page 2: Table Of Contents
iNDEX general warnings............................3 bassinet, infant carrier & second seat warnings..................4 features..............................5 parts................................7 1. stroller frame opening........................... 8 2. to fit and remove the wheel guards..................... 9 3. rear wheel fitting and removal......................9 4. front wheel fitting and removal - 4 wheel model................10 5. -
Page 3: General Warnings
To prevent the risk of the Stroller catching fire, do not park it near an exposed heat source such as a radiator, open fire, barbecue, etc. • It may be unsafe to use accessories other than those tested and approved by Britax. • Remove Bassinet from the Stroller frame before folding Stroller. -
Page 4: Bassinet, Infant Carrier & Second Seat Warnings
warNiNgs bassiNEt warNiNgs: • Always remove your child from the Bassinet before fitting or removing from Stroller. • The Bassinet must be removed from the frame before folding. • Do not lift Stroller by the Bassinet. Only use Strider Bassinet with the Strider Plus stroller. -
Page 5: Features
strOLLEr fEatUrEs s1. adjustable & removable canopy s2. pivotal handle s3. Visor s4. frame fold mouldings (on both sides) s5. canopy mesh (under zip) s6. arm bar s7. removeable & reversible stroller seat s8. stroller seat release buttons (on both sides) s9. - Page 6 strOLLEr fEatUrEs s22. canopy window s23. backrest recline lever s24. tether strap s25. head pillow adjustment slider (under zip) s26. accessory bag s27. rear wheel release s28. brake s29. Mouldings (for attachment to second seat connecting pins) s30. second seat release buttons s31.
-
Page 7: Parts
strOLLEr parts stroller frame stroller seat armbar tether strap canopy seat pad shoulder pads accessory bag front wheels (4 wheel model) rear wheels Mesh cover front wheel (3 wheel model) wheel guards raincover bootcover... -
Page 8: Stroller Frame Opening
strOLLEr assEMbLY & OpEratiON 1. strOLLEr fraME OpENiNg Lay the frame on a flat surface. release the frame lock and lift up by the handle to partially open the frame. continue to lift the handle up to open push down on the handle to confirm the frame until the left and right side frame the frame is locked open. -
Page 9: To Fit And Remove The Wheel Guards
strOLLEr assEMbLY & OpEratiON 2. tO fit aND rEMOVE thE whEEL gUarDs position the left and fit each guard onto the pull on each guard right guards beside the moulding at the base of the in the direction shown, to frame as shown. -
Page 10: Front Wheel Fitting And Removal - 4 Wheel Model
strOLLEr assEMbLY & OpEratiON 4. frONt whEEL fittiNg aND rEMOVaL - 4 whEEL MODEL NOtE: tip the frame backwards for more take each front wheel assembly and convenient assembly. push the axle into the wheel housing, until it locks in. pull on both front wheel sets to make to remove the wheel assembly, turn sure they are locked on. -
Page 11: Front Wheel Fitting And Removal - 3 Wheel Model
strOLLEr assEMbLY & OpEratiON 5. frONt whEEL fittiNg aND rEMOVaL - 3 whEEL MODEL NOtE: tip the frame backwards for more take the front wheel assembly and convenient assembly. push the axle into the wheel housing, until it locks in. pull on the front wheel to make sure it to remove the wheel assembly, push is locked on. -
Page 12: Swivel/Fixed Front Wheel Operation - 4 Wheel Model
strOLLEr assEMbLY & OpEratiON 6. swiVEL/fiXED frONt whEEL OpEratiON - 4 whEEL MODEL NOtE: always lock the front swivel wheels when on uneven surfaces. for swivel wheel mode, to lock the front the front wheels will slide both red latches wheels into the fixed automatically lock into the up until they lock it into... -
Page 13: To Operate The Brake
strOLLEr assEMbLY & OpEratiON 8. tO OpEratE thE brakE warNiNg - always apply the brakes when parking the stroller. the stroller may roll away even if left unattended for a few moments. to lock both rear to unlock both rear wheels, press the red brake wheels, firmly lift up the lever all the way down. -
Page 14: To Fit The Accessory Bag
strOLLEr assEMbLY & OpEratiON 10. tO fit thE accEssOrY bag NOtE: adjust the pivot handle up to create more assembly space (refer to section 9). the bag firstly needs to hold the bag up by the attach the hook strip to be attached to the pile strip black back flap on the rear the pile strip on the inside... -
Page 15: Fitting The Stroller Seat To The Frame
strOLLEr assEMbLY & OpEratiON 11. fittiNg thE strOLLEr sEat tO thE fraME warNiNg - always remove your child from the stroller seat before installing, removing or changing seat direction. NOtE: the seat is reversible so it can face in either forward or rearward position. hold the stroller seat over the frame. -
Page 16: To Fit The Armbar
strOLLEr assEMbLY & OpEratiON 12. tO fit thE arMbar warNiNg: when a child is in the stroller, keep the armbar attached to the frame at all times. One side at a time, press in and hold the release the button, align the armbar pin with engaging / release button, then pull on the armbar to... -
Page 17: Adjusting The Backrest
strOLLEr assEMbLY & OpEratiON 13. aDjUstiNg thE backrEst CAUTION: Ensure that your child’s limbs are inside the seating area before adjusting the backrest. Be prepared to support your child’s weight when adjusting the backrest to adjust up or down , continue to hold the there are 3 indicated fully lift the adjusting lever... -
Page 18: To Face The Seat In Opposite Direction
strOLLEr assEMbLY & OpEratiON 15. tO facE thE sEat iN OppOsitE DirEctiON. warNiNg: always remove your child from the stroller seat before changing seat direction. refer to section 14 for refer to section 11 for removing the seat from the fitting the seat to the frame. -
Page 19: To Fit, Use And Remove The Canopy
strOLLEr assEMbLY & OpEratiON 17. tO fit, UsE aND rEMOVE thE caNOpY to attach the canopy, attach the canopy to adjust the canopy, slide the canopy mouldings hook strips to the pile strips open by pulling forward, onto the frame mouldings around the top of the frame or close by pushing it until they connect together. -
Page 20: Harness Adjustment
strOLLEr assEMbLY & OpEratiON 17. tO fit, UsE aND rEMOVE thE caNOpY - cONtiNUED the window cover is to open the window to remove the canopy, kept in place by a hidden cover, roll up the cover and pull the canopy off the magnet located at the secure with the elastic and frame mouldings. -
Page 21: Tether Strap
strOLLEr assEMbLY & OpEratiON 19. tEthEr strap WARNING: Use the tether strap to prevent the Stroller from rolling away. NOtE: a tether strap is fitted to this stroller, always place the loop over desired wrist when using the stroller. if the tether strap slide your hand if you want to use is removed, attach by... -
Page 22: To Use The Reversible Shoulder Pads
strOLLEr assEMbLY & OpEratiON 21. tO UsE thE rEVErsibLE shOULDEr paDs NOtE: the shoulder pads are reversible. fit the reversible repeat for the other the reverse side of the shoulder pads by fitting reversible shoulder pad. shoulder pad has a different around the harness fabric pattern. -
Page 23: To Fit The Bootcover
strOLLEr assEMbLY & OpEratiON 23. tO fit thE bOOtcOVEr raise the leg support pull the top of connect the press to the horizontal position. bootcover under the armbar studs to keep in place. hook the bootcover and then back over the top. the bootcover is now ready ‘pocket’... -
Page 24: To Use The Footmuff
strOLLEr assEMbLY & OpEratiON 25. tO UsE thE fOOtMUff (pUrchasED sEpEratELY) NOtE: always secure the harness through the strap holes before use. to prepare the stroller Undo the buckle to fit the footmuff into for fitment of the footmuff, prongs from the buckle the stroller, first unzip firstly, ensure the head housing, then release... -
Page 25: To Fit The Mesh Cover
strOLLEr assEMbLY & OpEratiON 25. tO UsE thE fOOtMUff - cONtiNUED the footmuff is now Engage the other side ready for use. place the of the armbar (see section child in the stroller and 12). roll the top section connect the harness of the footmuff over the buckle. - Page 26 strOLLEr assEMbLY & OpEratiON 26. tO fit thE MEsh cOVEr - cONtiNUED Lift the fabric cover as to fit the mesh cover wrap the elastic loops required or lower for most over the bassinet, place and clips around the hook protection.
-
Page 27: To Fit The Raincover
strOLLEr assEMbLY & OpEratiON 27. tO fit thE raiNcOVEr to fit the raincover to pull the rear raincover join the hook and pile the stroller - place over the section down between the around the handle tube. stroller canopy as shown. handle and down the back Loop the elastic section of the stroller. - Page 28 strOLLEr assEMbLY & OpEratiON 27. tO fit thE raiNcOVEr - cONtiNUED pull the rear raincover join the hook and pile to fit the raincover section down between the around the handle tube. to the infant carrier and handle. second seat - follow step c1, then pull the rear raincover section down between the handle...
-
Page 29: Bassinet Warnings
bassiNEt assEMbLY & OpEratiON 28. bassiNEt assEMbLY, fittiNg & rEMOVaL (OptiONaL accEssOrY) warNiNg: remove stroller seat or infant carrier from the frame before fitting bassinet. warNiNg: always remove your child from the bassinet before fitting or removing from the stroller. warNiNg: bassinet must always face towards the handle. - Page 30 bassiNEt assEMbLY & OpEratiON 28. bassiNEt assEMbLY, fittiNg aND rEMOVaL - cONtiNUED attach hook and loop fold canopy down fasten hook and loop tabs on canopy to the tabs around the handle (refer to item 28D). insert liner on both side and in mouldings and stretch the the pad into the bassinet 2 places near the main...
- Page 31 bassiNEt assEMbLY & OpEratiON 28. bassiNEt assEMbLY, fittiNg aND rEMOVaL - cONtiNUED M to remove bassinet continue to hold lever NOtE: a body band is also from the stroller, firmly lift up and once released, lift installed in the base of the up and unlock the main the bassinet out of the bassinet for optional use.
-
Page 32: Infant Carrier Warnings
iNfaNt carriEr assEMbLY & OpEratiON 29. iNfaNt carriEr fittiNg aND rEMOVaL (sOLD sEparatELY) WARNINGS: • Do not leave the child in the carrier for extended periods. • The carrier is designed to provide mobility outside of the car but it should not be used instead of an appropriate cot. - Page 33 iNfaNt carriEr assEMbLY & OpEratiON 29. iNfaNt carriEr fittiNg aND rEMOVaL - cONtiNUED by squeezing in release the handle the handle indicator and holding the latches latches. then with one should now be grEEN and on either side of the hand holding the front of the infant carrier should handle, rotate the handle...
- Page 34 iNfaNt carriEr assEMbLY & OpEratiON 29. iNfaNt carriEr fittiNg aND rEMOVaL - cONtiNUED continue to rotate Lift and remove the the handle forward until infant carrier away from it returns to the upright the stroller. position. release the latches, the indicator should now be grEEN.
-
Page 35: To Fold/Close The Stroller
assEMbLY & OpEratiON 30. tO fOLD/cLOsE thE strOLLEr remove the bassinet or infant carrier if connected to the frame prior to folding. the rain cover must also be removed it fitted. NOtE: seat unit and wheels can be removed to reduce the total folded size if required. see sections 4 or 5 &... - Page 36 assEMbLY & OpEratiON 30. tO fOLD/cLOsE thE strOLLEr - cONtiNUE release the front return the pivot pull release mouldings wheels into swivel mode handle to the straight 1 & 2 all the way up and to allow for more compact position.
- Page 37 assEMbLY & OpEratiON 30. tO fOLD/cLOsE thE strOLLEr - cONtiNUE Compact Folding Tips stroller seat separated from the two separate separation of the stroller seat the frame prior to folding. components shown after and frame promotes easier folding. handling and storage.
-
Page 38: Second Seat Warnings
sEcOND sEat assEMbLY & OpEratiON 31. tO UsE thE sEcOND sEat WARNINGS: • the second seat cannot be used in conjunction with the bassinet. • the second seat must only be used with a sc or steelcraft stroller with compatible attachments. - Page 39 sEcOND sEat assEMbLY & OpEratiON 31. tO UsE thE sEcOND sEat - cONtiNUED Parts supplied with Second Seat ss1. second seat assembly ss2. second seat engaging pins (2) ss3. One hand, 4 position reclining backrest ss4. adjustable /removable canopy ss5. safety lock ss6.
-
Page 40: To Fit Second Seat To The Stroller
sEcOND sEat assEMbLY & OpEratiON 31. tO UsE thE sEcOND sEat - cONtiNUED 31.1 To fit Second Seat to the Stroller NOtE: for easier installation, rotate the pivotal handle in the most upright position. remove the accessory the second seat hold the second seat bag if fitted. -
Page 41: To Adjust Into Seating Positions
sEcOND sEat assEMbLY & OpEratiON 31. tO UsE thE sEcOND sEat - cONtiNUED 31.2 To adjust into seating positions adjust to desired the seat will slide up seating position by using and down the frame. Lock the one hand backrest into any one of 4 seating adjusting lever. -
Page 42: Reversible Shoulder Pads
sEcOND sEat assEMbLY & OpEratiON 31. tO UsE thE sEcOND sEat - cONtiNUED 31.5 Reversible shoulder pads NOtE: the shoulder pads are reversible. fit the reversible repeat for the other the reverse side of the shoulder pads by fitting reversible shoulder pad. shoulder pad has a different around the harness fabric pattern. -
Page 43: To Fold The Second Seat While Attached To The Frame
sEcOND sEat assEMbLY & OpEratiON 31. tO UsE thE sEcOND sEat - cONtiNUED 31.7 To fold the Second Seat while attached to the frame WARNING: remove the child from the second seat before attempting to fold NOtE: fold the second seat before folding the stroller. fold the canopy at the same time, the image above... -
Page 44: To Remove Second Seat From The Frame
sEcOND sEat assEMbLY & OpEratiON 31. tO UsE thE sEcOND sEat - cONtiNUED 31.8 To remove Second Seat from the frame WARNING: remove the child from the second seat before attempting to fold. first, fold the second with the second seat hold the sides of the seat up under the frame - in the folded position,... -
Page 45: To Use The Adaptors With The Stroller Seat
sEcOND sEat assEMbLY & OpEratiON 31. tO UsE thE sEcOND sEat - cONtiNUED 31.9 To use the adaptors with the Stroller seat NOtE: adaptors are supplied to create more space if required, when using the second seat. for correct connection to the stroller frame, the adaptors move the stroller seat mounting closer to the front of the stroller. -
Page 46: To Use The Adaptors With The Infant Carrier
sEcOND sEat assEMbLY & OpEratiON 31. tO UsE thE sEcOND sEat - cONtiNUED 31.10 To use the adaptors with the Infant Carrier. NOtE: adaptors are supplied to create more space if required, when using the second seat. for correct connection to the stroller frame, the adaptors move the infant carrier mounting closer to the front of the stroller. -
Page 47: Care And Maintenance
Use only those parts and accessories tested and approved by britax. -
Page 48: Warranty
www.striderplus.com.au ART No.4001103...