Step 2: Setting The Clock - Sony 4-114-026-11(1) Quick Start Manual

Disconnecting the IC
recorder from your
computer
Follow the procedures below; otherwise,
data may be damaged.
1
Make sure that the operation
indicator is not flashing.
2
Disconnect the IC recorder from the
USB connector of the computer.
On the Windows screen, left-click
"Safely Remove Hardware" on the
taskbar, and click "Safely remove USB
Mass Storage Device. "
On the Macintosh screen, drag the "IC
RECORDER" on the desktop to "Trash"
and drop it there.
For details on disconnecting the
IC recorder, refer to the operating
instructions supplied with your
computer.
Step 2: Setting the
Clock
 , 
/MENU
You need to set the clock to use the
alarm function or record the date and
time.
Clock setting display appears when you
insert battery for the first time, or when
you insert a battery after the IC recorder
has been without battery for more than
3 minutes, "SET DATE & TIME" appears,
and then the year section flashes in the
display window.

ENT

GB