Intel Braswell Series Technical Manual page 30

This item should be set as [Disabled] for Windows XP.
EIST
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable Intel SpeedStep.
When set as [Enabled], user can make further settings in 'Turbo Mode':
Turbo Mode
The optional settings: [Disabled]; [Enabled].
Use this item to enable or disable Intel Turbo Mode.
CPU C State Report
Use this item to enable or disable CPU C state report to OS.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following item shall appear:
Max CPU C-State
This item controls Max C state that the processor will support.
The optional settings: [C7]; [C6]; [C1].
4 SATA Configuration
Press [Enter] to make settings for the following sub-items:
SATA Configuration
SATA Controller
The optional settings are: [Enabled]; [Disabled].
When set as [Enabled], the following items shall appear:
SATA Mode Selection
The default setting is: [AHCI].
SATA Interface Speed
The item is for user to set the maximum speed the SATA controller can support.
The optional settings are: [Gen1]; [Gen2]; [Gen3].
M.2 SATA
Port
The optional settings are: [Enabled]; [Disabled].
4 Network Stack Configuration
Press [Enter] to go to 'Network Stack' screen to make further settings.
25