ActionTec WNS100 User Manual page 52

128-bit Keys Selecting "128 Bit Keys" from the "
WEP
menu activates 128-Bit
comprising 26 hexadecimal digits. A hexadecimal digit consists of alphanumeric
characters ranging from
To create a 128-bit
hexadecimal digit characters in the Key text box. After activating
then enter
26
128-bit on the
WEP
network only if this key is entered in the computer's wireless encryption scheme.
WPA-PSK
Selecting
WPA-PSK
" " (WiFi Protected Access - Pre-Shared Key) option in the Wireless
WPA-PSK
Security Section. Here, the pre-shared key, group rekey interval, and type of
encryption are entered to activate
network.
WPA Pre-Shared Key
Enter the pre-shared key in this text box. All wireless devices wishing to join the
network must enter this pre-shared key to gain access. To create a pre-shared key,
enter at least eight alphanumeric characters in the text box. Also, make sure all
wireless devices on the network support
WPA Group Rekey Interval
Enter the group rekey interval in this text box (supports values from 1 to 1000;
default is 600). The group key interval is used to specify the frequency of the
temporal encryption automatically generated from the
Group rekey interval is supported by
WPA Encryption
TKIP (Temporal Key Integrity Protocol) is the only option here. Note that
supports the group rekey interval.
Chapter 4 Configuring the Wireless Settings
encryption.128-bit
WEP
or . An example of a 128-bit
0-9 A-F
3D44FE6CA1EF2ED3C421745DB1
key, activate Key 1 by clicking in the appropriate circle,
WEP
Device, a computer with wireless capability can join the
NAS
from the "Wireless Security" drop-down menu generates the
WPA-PSK
WEP
requires one or more keys,
WEP
security encryption for the wireless
and know the pre-shared key.
WPA
(see below).
TKIP
49
Encryption" drop-down
key is:
WEP
- password.
WPA PSK
TKIP