ActionTec WNS100 User Manual page 51

Actiontec Wireless Network Attached Storage Device User Manual
WEP
Selecting WEP from the "Wireless Security" drop-down menu generates the
" " (Wired Equivalent Privacy) option in the Wireless Security section. Here,
WEP
the authentication type, encryption level, and
security encryption for the wireless network.
WEP
Authentication Type
There are two authentication types: Open System and Shared Key. Open
System authentication allows any wireless-enabled device to recognize the
Device, if the correct
wireless-enabled devices with the correct
Device.
NAS
WEP Encryption
There are three options in the "
Bit Keys (10 Hex chars), and 128 Bit Keys (26 Hex chars).
Disable Selecting "Disable
ables the keys.
WEP
64-bit Keys Selecting "64 Bit Keys" from the "
WEP
menu activates 64-Bit
rate keys. Each key comprises 10 hexadecimal digits. A hexadecimal digits con-
sists of an alphanumeric character ranging from
-bit key is:
64 WEP
To create a set of
appropriate circles, then enter 10 hexadecimal digit characters in each Key text
box activated (Key 1-, Key 2-, Key 3-, Key 4-). After activating
the Device, a computer with wireless capability can join the network only if
NAS
these same keys are entered in the computer's wireless encryption scheme.
key is enabled on the device. Shared Key allows only
WEP
WEP
from the "
"
encryption.
WEP
4EA33D6872
-bit keys, activate one to four keys by clicking in the
64 WEP
keys are entered to activate
WEP
key or Shared key to recognize the
WEP
Encryption" drop-down menu: Disable, 64
Encryption" drop-down menu dis-
WEP
Encryption" drop-down
WEP
-bit requires one or more sepa-
64 WEP
or
0-9
48
. An example of a
A-F
-bit
64 WEP
NAS
on