ActionTec WNS100 User Manual page 30

View Log
Click this button to view the log file in separate window. The log file is a record of
activity on the
NAS
Enable NTP (Network Time Protocol)
If enabled, the
NAS
Protocol) Server.
NTP Server
Enter the domain name or
can be a public server (on the Internet) or a local server (on the local network).
NTP Status
This shows the status of the
Synchronize...
Select how often the
device. The time of the next synchronization can also be set.
Sync Now
Click this button to synchronize with the
Send E-Mail Alerts...
Click here to enable the sending of e-mail alerts by the
sent when there is some problem requiring the administrator's attention.
E-Mail Address (1)/(2)
Enter the e-mail addresses to which the alerts will be sent.
Subject
Enter the text that will appear in the "Subject" text box of an e-mail alert.
Chapter 3 Using the Administrative Utility
Device, which can help in management and troubleshooting.
Device will synchronize its clock with a
address of the
IP
update procedure.
NTP
Device synchronizes its clock with the specified
NAS
server to be used. The
NTP
Device immediately.
NAS
NAS
27
(Network Time
NTP
server
NTP
NTP
Device. Alerts will be