Advertisement
Using a serial connection, log in as root (default username) and the password is not required:
1.
Username: root
NOTE:
The username is case sensitive.
Press
Enter
. The End User License Agreement (EULA) appears.
2.
Read the information in the window. Press the Spacebar to advance each window until you have reached the end of the
3.
agreement. Type YES to accept the agreement, then press
Figure
1.
Figure 1: JSA7500 Appliance ID Selection
Select the appliance ID and then press
4.
For more information on the appliance ID, see the KB article KB14832 at
Select
from the following types of setup:
normal
5.
normal—Default setup.
recovery—HA recovery setup.
Select
. The Tuning Template window appears.
6.
Next
Select
Enterprise
to use to tune your appliance.
7.
Select
Next
. The Date and Time window appears.
8.
Select the method you want to use to set the date and time.
9.
Manual— Allows you to manually input the date and time. Select
Server— Allows you to specify your time server. Select
Select your time zone continent or area, and then select
10.
Select your time zone region, and then select
11.
Copyright © 2018, Juniper Networks, Inc.
Enter
to select
.
Enter
Next
Next
.
.
Next
.
Next
How to Set Up Your JSA7500 Appliance
. The Appliance ID selection window appears as shown in
https://kb.juniper.net/KB14832
.
Next
.
5
Advertisement
