Table of Contents
Advertisement
MDS-NT1
Note 1:The test mode and recording of this set are controlled by a personal computer, thus requiring the set to be connected to the PC.
Prepare the personal computer in which necessary software is already installed.
• Attached software "OpenMG Jukebox" (necessary for recording (check in, check out)) (Part No. : 4-237-880-01)
• Software for test mode "TestMode_S.exe" ("TestMode_S.exe" and essential files "data_files.csv", "Net MDUSB.dil" are distributed to-
gether with the Service Manual. For the test mode, copy these three files in the same folder beforehand)
Note 2:In the operation in the test mode, the operational description requiring "click
("xxx" indicates the button name)
Note 3:MD always plays double speed.
5-1.
PARTS REPLACEMENT AND ADJUSTMENT
If malfunctions caused by Optical pick-up such as sound skipping are suspected, follow the following check.
Check before replacement
5-7-2.
Laser Power Check
5-7-3.
Iop Compare
5-7-4.
Other faults are suspected.
Check the mechanism
(sled motor, etc).
24
SECTION 5
ELECTRICAL ADJUSTMENTS
Start
NG
(See page 28)
OK
NG
(See page 28)
OK
NG
Auto Check
(See page 29)
OK
[xxx]
" means that you have to click the button on the screen.
Replace optical pick-up or MDM-7S2B
Advertisement
Table of Contents
