SERVICE MODE
Microcomputer Version Display
Procedure:
[
]
1. Press the
button and
B/>
cable must be disconnected)
2. Connect the set to the PC with the attached USB cable.
3. Start up the software for test mode.
[TEST MODE]
4. Click the
.
5. Enter the test mode, then click the
6. "NT1-V**.****" is displayed. In the event of different display, click the
"**.****" indicates the microcomputer version.
Software Reset
Procedure:
[
]
1. Press the
B/>
button and
cable must be disconnected)
2. Connect the set to the PC with the attached USB cable.
3. Start up the software for test mode.
[TEST MODE]
4. Click the
.
5. Quit the software for test mode after the
Note: When retrying this operation, start from step 1.
System Requirements
•
IBM PC/AT or Compatible (The software does not run on Macintosh.)
– CPU: MMX˛ Pentium® 233 MHz or higher (Pentium® II 400 MHz or higher is recommended)
– Hard disk drive space: 60 MB or more (The amount of necessary space depends on the version of the Windows OS or the size of
your audio files.)
– RAM: 64 MB or more
– CD-ROM drive (capable of software installation and playback of an audio CD)
– Sound Board
– USB port (supports USB 2.0 Full Speed. (previously USB 1.1))
•
Operating System: Windows® 98/Windows® 98 Second Edition/Windows® 2000 Professional/Windows® Me/Windows® XP Home
Edition/Windows® XP Professional (manufacturer installed)
The following environments are not supported.
– Windows® 95, Windows® NT, or other versions of Windows® NT (such as Server)
– An environment that is an upgrade of the original manufacturer-installed operating system, as in the following examples:
Windows® 3.1/Windows® 95 t Windows® 98 (or Windows® 98 Second Edition/Windows® Me)
Windows® Me/Windows® 2000 Professional t Windows® XP
– Multi-boot environment with Windows® 2000 (or Windows® XP) and Windows® 98 (or Windows® 98 Second Edition/Win-
dows® Me)
•
Display: High (16 bit) Color or more (800
•
Internet access: for Web registration and EMD services
•
Windows Media Player (Version 6.4 or higher) installed for playing MP3 files.
•
Windows Media Player (Version 7.0 or higher) installed for playing WMA files.
•
We do not assure the operation of MusicClip on the computer other than VAIO series computer.
Notes
•
We do not assure trouble-free operation for all computers satisfying the system requirements.
•
Trouble-free operation is not guaranteed following the self-conducted upgrade of home-built PCs oroperating systems.
[
]
button until the NetMD indicator turns off (for more than 3 seconds). (During this step, the USB
x/Z
[JOG UP]
[JOG DOWN]
or
[
]
x/Z
button until the NetMD indicator turns off (for more than 3 seconds). (During this step, the USB
[REPEAT]
clicked.
480 dot or more)
to display "<INFORMATION> ", and click the
[ENTER/YES]
until it is displayed.
MDS-NT1
[ENTER/YES]
.
11