Using The Ir Repeater - Sony HT-IS100 Operating Instructions Manual

Home theater systems: bravia® theater system
Hide thumbs Also See for HT-IS100:
Table of Contents

Advertisement

Available languages

Available languages

• STBY OFF: you cannot enjoy the S-AIR
product while the subwoofer
is in standby mode.
• STBY ON: you can enjoy the S-AIR
product while the subwoofer
is in standby mode or turned
on.
5
Press AMP MENU.
The AMP menu turns off.
Notes
• When you set "S-AIR STBY" to "STBY ON," power
consumption during standby mode increases.
• The sound of the S-AIR product may be cut off when
the subwoofer is operated.
72
US

Using the IR repeater

About the IR REMOTE jacks
You can operate the subwoofer without pointing
the remote toward the remote commander
receiver if you connect an IR repeater (not
supplied) to the IR REMOTE jack.
Use an IR repeater when you install the remote
commander receiver in a place where signals
from the remote cannot reach.
Bottom of the subwoofer
IR REMOTE
IR IN
IR OUT1 IR OUT2
IR repeater
(not supplied)
Remote

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents