Step 3B: Connecting The Components Without Hdmi Jacks - Sony HT-IS100 Operating Instructions Manual

Step 3b: Connecting the Components without HDMI Jacks

When you connect a DVD player (recorder), satellite tuner, VCR, etc., that has no HDMI jacks, you
can choose the connecting combination of the system. This subwoofer is equipped with a function for
converting video signals. For details, see "Function for Conversion of Video Signals" (page 29).
Connecting a TV monitor
The image from a visual component connected to this subwoofer can be displayed on a TV monitor,
projector, etc.
Bottom of the
subwoofer
Notes
• Connect image display components such as a TV or a projector to the MONITOR OUT jacks on the subwoofer.
• Be sure to turn on the subwoofer when the video and audio of a playback component are being output to a TV via
the subwoofer. If the power supply of the subwoofer is not turned on, neither video nor audio signal is transmitted.
Tips
• You can reassign the analog audio input using the AUDIO IN ASSIGNABLE jacks. For details, see "Reassigning
the analog audio input" (page 63).
• You can watch the selected input image when you connect the MONITOR OUT jack to a TV.
18
US
TV monitor, projector, etc.
Audio signal
or
A
BD IN DVD IN SAT IN
IR REMOTE ANTENNA
FM
75
IR IN IR OUT1 IR OUT2
COAXIAL
DMPORT ECM-AC2 IR-R100
OPTICAL
DC 5V
0.7A MAX
TV IN DVD IN
EZW-T100
SPEAKER
A Optical cable (supplied)
B Audio cord (not supplied)
C Component video cord (not supplied)
Video signal
B C
VIDEO
TV OUT
HDMI DVD IN SAT IN
VIDEO IN
AM
L
ASSIGNABLE
COAXIAL
R
SAT IN SAT IN AUDIO IN
ASSIGNABLE
DIGITAL COMPONENT VIDEO
ONLY FOR SS-IS15
CENTER FRONT R FRONT L SUR R SUR L
INPUT
MONITOR
OUT
Y
P /
B
C
B
P /
R
C
R
: Signal flow