Presetting Radio Stations - Sony HT-SF800M Operating Instructions Manual

Presetting radio stations

You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1
Press TUNER repeatedly to select the
FM or AM band.
The last received station is tuned in.
2
Tune in the station that you want to
preset using Automatic Tuning
(page 17) or Direct Tuning (page 18).
3
Press MEMORY.
"MEMORY" appears in the display for a
few seconds. Do steps 4 to 5 before the
display goes out.
4
Press PRESET + or PRESET –
repeatedly to select a preset station
number.
Each time you press the button, you can
select the preset station number as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
If "MEMORY" goes out before you select
the preset station number, start again from
step 3.
Tips
• You can also use PRESET TUNING + or
PRESET TUNING – on the receiver.
• You can also press SHIFT repeatedly to select a
memory page (A, B or C) and then press the
numeric buttons to select a preset number.
5
Press MEMORY again.
The station is stored to the selected preset
number.
If "MEMORY" goes out before you press
MEMORY, start again from step 3.
6
Repeat steps 2 to 5 to preset another
station.
Tuning to preset stations
1
Press TUNER repeatedly to select the
FM or AM band.
The last received station is tuned in.
2
Press PRESET + or PRESET –
repeatedly to select the preset station
you want.
Each time you press the button, you can
select the preset station as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
Using the receiver
1
Press INPUT SELECTOR repeatedly to
select FM or AM.
2
Press PRESET TUNING – or PRESET
TUNING + repeatedly to select the preset
station you want.
To select the preset station
directly
Press the numeric buttons.
The preset station of the selected number in the
current memory page is tuned in. Press SHIFT
repeatedly on the remote to change the memory
page.
19 GB