Storing Fm Stations Automatically; Autobetical; Presetting Radio Stations - Sony HT-DDW670 Operating Instructions Manual

-- AUTOBETICAL
(Models of area code CEL, CEK only)
This lnuctiou lets you store up to 30 FM and FM
RDS stations in alphabetical order without
redundaucy. Additioually, it ouly stores the
stations with the clearest signals.
If you want to store FM or AM stations oue by
one, see "Presetting radio statious" (page 20).
Use the buttons ou the receiver lor the operation.
1
Press I/@ to turn off the receiver.
2
Hold down MEMORY and press I/_ to
turn the receiver back on.
"AUTO-BETICAL SELECT' appears in
the display and the receiver scaus and stores
all the FM and FM RDS stations in the
broadcast area.
For RDS statious, the tuner first checks for
stations broadcastiug the same program,
then stores only the one with the clearest
sigual. The selected RDS statious are sorted
alphabetically by their Program Service
uame, theu assigued a 2-character preset
code. For more details on RDS, see
page 21.
Regular FM statious are assigned 2-
character preset codes and stored after the
RDS station.
When done, "FINISH" appears in the
display momentarily aud the receiver
returns to the normal operation.
Notes
• Do not press ally button on the receiver or supplied
remote during aulobetical operalion, excepl I/(_).
• If you move to another area, repeat this procedure to
store stations ill your new area.
• For details on tuning the stored stations, see "Tuning
to preset stations" (page 21).
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
You can preset up to 30 FM or AM stations.
Theu you cau easily tune in the statious you
often listen to.
Presetting radio stations
1
Press FM or AM to select the FM or AM
band.
The last received station is tuned iu.
€11
_, Tune in the station that you want to
preset using Automatic Tuning
(page 19) or Direct Tuning (page 19).
3 Press MEMORY,
"MEMORY" appears in the display for a
lew seconds. Do steps 4 to 5 belore the
display goes out.
4
Press PRESET TUNING + or PRESET
TUNING - repeatedly to select a preset
station number,
Each time you press the hutton, you can
select the preset statiou number as follows:
If "MEMORY" goes out belore you select
the preset station number, start again h'om
step 3.
Tip
You can also use the remote to select a preset
station number. Press SHIFT repeatedly to select
a memory page (A, B or C) and then press the
n/imeric b/ittons to select a preset nomber.
Press MEMORY again.
The statiou is stored to the selected preset
Uulnber.
If "MEMORY" goes out before you press
MEMORY, start again from step 3.
Repeat steps 2 to 5 to preset another
station,
20_