Adding The Mobile Panel To The Project - Siemens SIMATIC HMI Series Operating Instructions Manual

6.1.2

Adding the Mobile Panel to the project

Requirement
● A project is open.
● A controller has been added to the project.
● Subnet and IP address of the controller are configured.
Procedure
1. Double-click "Add new device" in the project tree.
2. In the "Add new device" dialog, click "HMI".
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
Configuring the Mobile Panel
6.1 Configuration in WinCC
169