Siemens SIMATIC HMI Series Operating Instructions Manual page 141

Procedure
1. Open the "WinCC Internet Settings" dialog using the "WinCC Internet Settings" icon.
2. Change to the "Web Server" tab.
3. In the "Tag acces" group, define the type of access to the tags of the server HMI device.
– "Read/write": Read and write access
– "Read only": Read access
4. In the "Tag auhenticate" group, define the authentication required for access to the tags
of the server HMI device:
– "No authentication": No authentication required.
– "Authentication required": A password is required to access tags.
5. Select the options for starting and closing the Web Server.
– If the Web Server is to be started immediately after power-up of the HMI device, select
– Select the "Close with Runtime" option if the Web Server is to be closed together with
6. Press the "User Administration" button.
7. If you are prompted to enter the administrator password, enter the password. The
"UserDatabase-Edit" dialog box opens.
8. To create a new user, click "Add" in the "User Manager" tab. Enter a user name and
specify a password. The user enters the associated password when accessing the Web
Server.
9. Save the settings using "Apply".
10. Change to the "Authorizations" tab.
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
Configure a connection with password protection for access using the SIMATIC HMI
HTTP Protocol. In this case, you must select the "Authentication required" option; the
associated password on the HMI device must match the password of the configured
connection.
the "Start automatically after booting" option. If this option is disabled, the Web Server
must be started manually using the "Start Web-Server" button or a corresponding
element in the project.
the project. If this option is disabled, the Web Server continues running after the
project is closed.
Parameterizing the Mobile Panel
5.13 Configuring network operation
141