Faq (Specific Problems And Solution) - Canon PIXMA iP90 Service Manual

Hide thumbs Also See for PIXMA iP90:
Table of Contents

Advertisement

4. FAQ (Specific Problems and Solutions)
<Newly expected FAQ in the PIXMA iP90 / PIXUS iP90>
No.
*
Function
Symptom
1
C
Print
Print quality is rough.
results
2
B
Lamp
The power lamp
indication
continuously blinks,
twice in every 5
seconds, in green.
3
B
Print
In printing from an
Beam
address book, a long
mail address is not
printed completely.
* Occurrence level:
A: The symptom is likely to occur frequently.
B: The symptom may occur under certain conditions, but likeliness is assumed very low in practical usage.
C: The symptom is unlikely to be recognized by the user, and no practical issues are assumed.
Condition
Cause
When Bluetooth / IrDA
When the printer driver Print
infrared communication is
Options is set to "Change the
selected and the printer driver
print data size to match the
Print Options is set to
port", transferring data is
"Change the print data size to
compressed in Bluetooth /
match the port"*1.
IrDA infrared
*1: In the default setting,
communication.
"Change the print data
size to match the port" is
selected, because of an
improvement of data
transferring speed in
Bluetooth / IrDA infrared
communication.
When Bluetooth
When BJ Status Monitor is
communication is used and
activated, the printer
BJ Status Monitor is active.
regularly receives a signal
requiring status from a
computer.
(Bluetooth communication
specifications)
When printing on the credit
When printing on the credit
card size paper.
card size paper, due to
specifications in which a new
line is not added, a mail
address whose length is
beyond a paper width is not
printed completely.
Solution
1. Deselect "Change the print data size to
match the port". This causes data
transferring speed to become low.
<Procedure>
1. Set the following at the screen via the
printer driver (Properties -> Main tab ->
Print Options).
2. Set the print quality to Fine.
3. Set the Halftoning option to Diffusion in
the printer driver.
4. Print via USB connection.
This operation is not an error. Advise
users that it is not a problem. (See P.77
in Quick Start Guide.)
Print on paper other than the credit card
size paper.
16
Possible call or
complaint
Print quality is rough.
The power lamp
blinks.
An address book is
not printed
completely.

Advertisement

Table of Contents
loading

Table of Contents