Adjustment / Settings - Canon PIXMA iP90 Service Manual

3-3. Adjustment / Settings

(1) Service mode
The basic operations are the same as those of the i70 / PIXUS 50i.
In this section, destination settings, how to reset the waste ink counter, and EEPROM information
printing, which differ from those of the i70 / PIXUS 50i, are detailed.
<Service mode operation procedures>
1) Turn off a printer. While pressing the Resume/Cancel button, press the Power button.
The LED lights green to indicate that functions are selectable.
2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power
button.)
3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the
Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED
alternately lights in either orange or green, starting with orange.)
4) When the LED lights green, press the Resume/Cancel button as many times as you need, to
select the preferred function. (See the table below.) Each time the Resume/Cancel button is
pressed, the LED alternately lights in either orange or green, starting with orange.
Time(s) LED
0 times Green
1 time Orange Service test print
2 times Green
3 times Orange EEPROM initialization
4 times Green
5 times Orange Destination settings
10 times Green
5) After the function (menu) is selected, press the Power button. The LED lights green, and the
selected function will be performed. (When the operation completes, the printer returns to the
menu selection mode automatically.)
<To reset the waste ink counter>
6) Press the Resume/Cancel button the specified number of time(s), then press the Power button.
Time(s) LED
0 time Green
1 times Orange Platen waste ink counter
2 times Green
Note: When the waste ink counter is reset, print the EEPROM information as shown below,
and confirm that the value of the counter is 0 %.
(The color red indicates the changes from the i70 / PIXUS 50i.)
Function
Power off
EEPROM information print
Waste ink counter resetting
Return to the menu selection
Waste ink counter to be reset
Main waste ink counter
Main waste ink counter and platen waste ink counter (at the
same time)
When the print head is not installed, the carriage
returns and locks in the home position.
Proceed to step 5) below. Once executing step
5), then, move on to step 6) to select the waste
ink counter to be reset. (Different from the i70 /
PIXUS 50i.)
Proceed to step 5) below. Once executing step
5), then, move on to step 7) to select a
destination. (Different from the i70 / PIXUS 50i.)
7
Remarks