Table of Contents
Advertisement
7
Finishing
A. Template
A cardboard template of the front is printed on the outside
of the shipping box. Cut out the template along the outside
of the line for use in your installation. If using the cardboard
template, it will require 1/4-20 bolts to attach it to the fire-
place, (NOT INCLUDED). A metal template (see catalog)
is available for more durable continued use, remaining ac-
curate over time. Both measure 1/8 in. (3 mm) larger all the
way around than the actual front.
Note: This 1/8 in. of the non-combustible material must be
painted or the red will be visible.
Tools Required: 1/8 in. Allen wrench.
•
Remove the screws from the fascia and remove fascia
from the fireplace (if installed). Save the screws. Store
the fascia in a safe, protected area to prevent scratching
or other damage.
• Install the template on the front of the fireplace (Figure
7.1) with screws removed or provided.
NOTE: Do not over tighten the screws, just tighten up
the template enough so that it comes in contact with the
outer flanges on the front of the fireplace.
You are now ready to continue your installation with the
desired decorative material. The template also serves as
a protective covering and prevents damage to the front of
the fireplace.
TMP-PIIIA
Attach template
with screws here
TMP-PIIIR
Attach template
with screws here
Figure 7.1
Install the Finishing Template
Quadra-Fire • PIONEER - III • 4182-901 Installation Manual • Rev C • 07/19
TMP-PIIIA
39.25
29.13
TMP-PIIIR
36.75
0.50
0.07
Figure 7.2
Template Dimensions
Note: DO NOT remove hang tags until installing finish
materials.
NOTE:
The decorative fascia must be removable for future
serviceability.
R35.21
R28.13
23.50
2X 33.27
2X 19.44
39.25
TYP
39.25
37
Hide quick links:
Advertisement
Table of Contents
