Turning Off The Bluetooth Audio; Adjusting The Volume Of The Radio From Bluetooth Audio Device; Clearing All Bluetooth Devices Information - Motorola APX Series User Manual

English

Turning Off the Bluetooth Audio

• Turning off the Bluetooth audio using the
preprogrammed button:
a. Press the preprogrammed Bluetooth Audio
Reroute button to route the audio from the
headset to the radio.
You hear a short, medium-pitched tone. The
display shows SPKR ON.
Adjusting the Volume of the Radio from
Bluetooth Audio Device
Ensure that the Bluetooth audio device is connected to the
radio.
Your radio can only control the volume of MCW and OCW
Bluetooth enabled audio device. If the radio is paired with
other Bluetooth enabled audio device, its volume is
94
independent from the APX radio. In this case, the volume is
only adjustable on the device.
Adjust volume up/down on the Bluetooth audio
device.
The radio display shows VOL XX and sounds a short,
medium-pitched tone.
Clearing All Bluetooth Devices
Information
• Clearing all Bluetooth devices information using the
preprogrammed Bluetooth On/Off button:
a. Long press the preprogrammed Bluetooth
On/Off button.
You hear a short, medium-pitched tone. The
display shows PLS WAIT to indicate clearing is in
progress.
If successful, the display shows ALL CLR.
If unsuccessful, the radio sounds a short, low-
pitched tone.The display shows CLR FAIL.