English
Change of Channels during Emergency
For ALL Emergency transmissions, when changing
channels:
•
If the new channel is also preprogrammed for
Emergency, you can change channels while in
Emergency operation. The emergency alarm or call
continues on the new channel.
•
If the new channel is NOT preprogrammed for
Emergency, the display shows NO EMERG, and you hear
an invalid tone until you exit the Emergency state or
change to a channel preprogrammed for Emergency.
Emergency Keep-Alive Feature
This feature, when enabled, prevents the radio from being
turned off by using the On/Off Control Knob when the
radio is in the Emergency state.
68
NOTICE:
The radio only exits the Emergency state using one
of the ways mentioned in the previous sections.
See
Sending an Emergency Alarm on page
Sending an Emergency Call (Trunking Only) on
page
64,
Sending an Emergency Alarm with
Emergency Call on page
Emergency Alarm on page
Fireground
The portable Fireground Communications System is
designed for deployment at an incident scene. It consists of
central components:
•
Your APX portable radios
•
Incident Management Software
•
Command Terminal
•
Radio Frequency (RF) Modem (Conventional Only)
•
Control Channel Radio (Trunking)
•
Optional Data Radio (Trunking)
•
Accountability Server (Trunking)
•
DVRS (Optional)
63,
66, or
Sending a Silent
67.