Attaching The Belt Clip - Motorola APX Series User Manual

NOTICE:
To prevent damage to the connector, shield it with
the connector cover when not in use.
1 To remove the accessory connector cover, rotate the
thumbscrew counterclockwise until it disengages
from the radio.
NOTICE:
If the thumbscrew is too tight, use an Allen
wrench at to loosen it first.
A
B
C
2 Rotate and lift the connector cover to disengage it
from the radio.
3 To attach the accessory connector cover, insert the
hooked end of the cover into the slot above the
connector.
4 Press the top of the cover downward to seat it in the
slot.
5 Once in place, tighten by rotating the thumbscrew
clockwise by hand.

Attaching the Belt Clip

1 Align the grooves of the belt clip with those of the
radio and press upward until you hear a click to
attach the belt clip.
English
29