Table of Contents
Advertisement
• For vehicles equipped with Keyless Enter-
N-Go — Passive Entry, make sure the vehicle
ignition system is OFF.
2. Perform one of the following methods to lock
the vehicle:
• Push lock on the interior power door lock
switch with the driver and/or passenger door
open.
• Push the lock button on the exterior Passive
Entry Door Handle with a valid key fob avail-
able in the same exterior zone (refer to "Key-
less Enter-N-Go — Passive Entry" in "Get-
ting To Know Your Vehicle" for further
information).
• Push the lock button on the key fob.
3. If any doors are open, close them.
To Disarm The System
The vehicle security alarm can be disarmed using
any of the following methods:
• Push the unlock button on the key fob.
26
• Grasp the Passive Entry Unlock Door Handle (if
equipped, refer to "Keyless Enter-N-Go — Pas-
sive Entry" under "Getting To Know Your Vehicle"
for further information).
• Hands Free Liftgate passive entry activation (if
equipped with Hands Free Liftgate passive entry).
• Cycle the vehicle ignition system out of the OFF
position.
– For vehicles equipped with Keyless Enter-
N-Go — Passive Entry, push the keyless ig-
nition START/STOP button (requires at
least one valid key fob in the vehicle).
NOTE:
• The driver's door key cylinder and the liftgate
button on the key fob cannot arm or disarm the
vehicle security alarm.
• The vehicle security alarm remains armed during
power liftgate entry. Pushing the liftgate button
will not disarm the vehicle security alarm. If some-
one enters the vehicle through the liftgate and
opens any door, the alarm will sound.
• When the vehicle security alarm is armed, the
interior power door lock switches will not unlock
the doors.
The vehicle security alarm is designed to protect
your vehicle. However, you can create conditions
where the system will give you a false alarm. If one of
the previously described arming sequences has oc-
curred, the vehicle security alarm will arm regardless
of whether you are in the vehicle or not. If you
remain in the vehicle and open a door, the alarm will
sound. If this occurs, disarm the vehicle security
alarm.
If the vehicle security alarm is armed and the battery
becomes disconnected, the vehicle security alarm
will remain armed when the battery is reconnected;
the exterior lights will flash, and the horn will sound.
If this occurs, disarm the vehicle security alarm.
Advertisement
Table of Contents
