Table of Contents
Advertisement
WARNING!
Leaving the Speed Control system on when not
in use is dangerous. You could accidentally set
the system or cause it to go faster than you want.
You could lose control and have an accident.
Always leave the system off when you are not
using it.
To Set A Desired Speed
Turn the Speed Control on.
NOTE:
The vehicle should be traveling at a steady speed
and on level ground before pushing the SET (+) or
SET (-) button.
When the vehicle has reached the desired speed,
push the SET (+) or SET (-) button and release.
Release the accelerator and the vehicle will operate
at the selected speed.
To Resume Speed
To resume a previously set speed, push the RES
button and release. Resume can be used at any
speed above 20 mph (32 km/h).
To Deactivate
A soft tap on the brake pedal, pushing the CANC
(cancel) button, or normal brake pressure while
slowing the vehicle will deactivate the speed control
without erasing the set speed from memory.
Pushing the on/off button or cycling the ignition to
OFF, erases the set speed from memory.
ADAPTIVE CRUISE
CONTROL (ACC ) —
IF EQUIPPED
Adaptive Cruise Switches
1 — Adaptive Cruise Control (ACC) On/Off
2 — Distance Setting – Decrease
3 — Distance Setting – Increase
147
Advertisement
Table of Contents
