Order Taker Unit (Wx-T3020), All In One Headset (Wx-H3050); Opening The Switch Compartment; Dip Switch Setting - Panasonic Attune WX-C3010 Installation Instructions Manual

6.4 Order Taker Unit (WX-T3020), All in One Headset (WX-H3050)

6.4.1 Opening the Switch Compartment

1. Press the power button for 2 seconds or more to turn off the headset.
2. Unscrew the screw and open the switch compartment.
3. Set the switches as described below.
4. After finishing the setup, replace the cover.
5. Turn on the headset.
Unscrew the screw and
open the switch
compartment.

6.4.2 Dip Switch Setting

An eight-bit DIP Switch is provided for system setups. The initial setting is marked with an asterisk *.
Note: Be sure to turn off the headset in Step 1. Otherwise, the DIP Switch will not be activated until you turn the power off
and on again.
SWITCH
#SW1
#SW2
#SW3
#SW4
#SW5
#SW6
#SW7
#SW8
Order Taker Unit
(WX-T3020)
function Items
Auto TALK Lock setting
Auto TALK Lock Lane Select
T2 Button setting
TALK LOCK/ PTT
PAGE LOCK/PTT
Voice Prompt Language
Voice Prompt Language
RF Power
All in One Headset
(WX-H3050)
ON
ON
Lane B
DIRECT LANE
LOCK
LOCK
See below
Full Power *
NOTE : The initial setting is marked with an asterisk *.
Unscrew the screw and
open the switch
compartment.
OFF
OFF*
Lane A*
NORMAL*
PTT*
PTP*
Reduce Power