Fan Speed Setting; Timer Setting - York DWCPXY Owner's Manual

Fig.3.3.1
3.4 Fan Setting
In the "On" state of the unit, press Fan and then the fan speed of the indoor unit will change
sequentially as shown in Fig.3.4.1.

3.5 Timer Setting

In the "On" state of the unitpress the Timer button to set the timer "Off" on the unit. In the "Off"-state
of the unit, press the Timer button to set the timer "On" in the same way.
• Timer "On" setting:
In the "Off" state of the unit without a timer setting, if the Timer button is pressed, the LCD will
display the hourwith ON blinking. In this case, press the ▲ or ▼ button to adjust the timer. Then
press Timer to confirm.
• Timer "Off" setting:
In the "On"-state of the unit without a timer setting, if the Timer button is pressed, the LCD will
display the hour with OFF blinking. In this case, press the ▲ or ▼ button to adjust the timer ON.
Then press Timer to confirm.
• Cancel timer:
After setting the timer, if the Timer button is pressed, the LCD won't display that the hour so the
timer setting is canceled.
Timer "Off" setting under the "On" state of the unit is shown in Fig.3.5.1 below.
Wired Zone Controller DWCPXY
Low Middle
5
Fig.3.4.1
High