Alcatel-Lucent 7705 SAR System Management Manual page 82

Security Command Reference
Management Access Filter Commands
management-access-filter
Syntax [no] management-access-filter
Context config>system>security
Description
This command creates the context to edit management access filters and to reset match criteria.
Management access filters control all traffic in and out of the CSM. They can be used to restrict
management of the 7705 SAR by other nodes outside either specific (sub)networks or through
designated ports.
Management filters, as opposed to other traffic filters, are enforced by system software.
The no form of the command removes management access filters from the configuration.
Default
n/a
ip-filter
Syntax ip-filter
Context config>system>security>management-access-filter
Description
This command creates the context to configure IP filter commands.
ipv6-filter
Syntax ipv6-filter
Context config>system>security>management-access-filter
Description
This command creates the context to configure IPv6 filter commands.
82 7705 SAR OS System Management Guide