Description Of The Item "Data Format - A&D GX Series Instruction Manual

4-5 Description of the Item "Data format"

A&D standard format
This format is used when the peripheral equipment can receive the A&D format. If an AD-8121 is
used, set the printer to MODE 1 or 2.
? This format consists of fifteen characters excluding the terminator.
? A header of two characters indicates the balance condition.
? The polarity sign is placed before the data with the leading zeros. If the data is zero, the plus
sign is used.
? The unit, consisting of three characters, follows the data.
DP (Dump print) format
This format is used when the peripheral equipment can not receive the A&D format. If an AD-8121 is
used, set the printer to MODE 3.
? This format consists of sixteen characters excluding the terminator.
? A header of two characters indicates the balance condition. No overload header is used.
? The polarity sign is placed before the data, with spaces in place of leading zeros, if the data is
not zero or overloaded.
? The unit, consisting of three characters, follows the data.
5if type 2
KF format
This is the Karl-Fischer moisture meter format and is used when the peripheral equipment can only
communicate using this format.
? This format consists of fourteen characters excluding the terminator.
? This format has no header characters.
? The polarity sign is placed before the data, with spaces in place of leading zeros, if the data is
not zero or overloaded.
? This format outputs the unit only for a stable value.
5if type 0
5if type 1
19