? Analog output
Two modes are available: To convert the specified weight value digits to voltage, and to convert
the value, in the range from zero to the weighing capacity, to voltage.
Output voltage range selection: Using the slide switch located on the option panel, the output
voltage range can be switched between 0-1 V and 0.2-1V. The default setting at shipment is 0-1V.
? RS-232C
The RS-232C interface is used to communicate with a printer or a personal computer. Using the
RS-232C interface, the following operations are available through a command from the computer:
Outputs the weighing data.
Controls the balance.
? Current loop
Current loop is a data output interface, mainly used as a printer interface.
? GLP output
GLP-compliant data output is available for RS-232C and current loop. Refer to the balance
instruction manual for details about GLP output.
1-2 Accessories
Each option is provided with the following accessories.
? GX-04: DIN connector (plug)
Instruction manual (this document) 1 copy
? GX-06: DIN connector (plug)
Screwdriver
Instruction manual (this document) 1 copy
Enters balance settings.
Retrieves the balance settings.
1 pc
1 pc
1 pc
3