Changing The Pause Duration; Dialing Mode; Keypad Lock - Binatone Oval Twin XD1220 Instruction Manual

3. Press the button repeatedly until the LCD
4. Press the OK button
settings, 1 to 5: 1=80 ms, 2=100ms, 3=180 ms, 4=300 ms, 5=600 ms).
5. Using the or
6. Press the OK button
7. Press and hold the CANCEL button

Changing the pause duration

1. Press the OK button
2. Press the button repeatedly until the LCD
3. Press the OK button
4. Press the button repeatedly until the LCD
5. Press the OK button
settings, 1 to 5: 1=1 s, 2=1.5 s, 3=2 s, 4=3 s).
6. Using the or
7. Press the OK button
8. Press and hold the CANCEL button
1. Press the OK button
2. Press the button repeatedly until the LCD
3. Press the OK button
4. Press the button repeatedly until the LCD
5. Press the OK button
6. Using the or
"PULSE".
7. Press the OK button
8. Press and hold the CANCEL button
You can lock the handset keypad to prevent the accidental button pressing. It can be
convenient if little children have access to the handset. When the keypad is locked, only the
OK button is functional. You can also answer the incoming call by pressing the CALL
button . During conversation, the lock is disabled, after hanging up it is enabled again.
Locking the keypad
1. Press the OK button
2. Press the "*" button
3. The LCD will display the "keypad locked" icon.
Disabling the keypad lock
1. Press the OK button
2. Press the "*" button
3. The "keypad locked" icon will disappear from the LCD.
, the LCD will show: "RECALL: X" (X = disconnect timeout
buttons, choose the appropriate disconnect timeout setting.
to confirm your selection and go to the previous menu item.
to exit this menu item.
, the LCD will show: "PHONE BOOK".
.
, the LCD will show: "PAUSE: X" (X = pause duration
buttons, choose the appropriate pause duration setting.
to confirm your selection and go to the previous menu item.
to exit this menu item.

Dialing mode

, the LCD will show: "PHONE BOOK".
.
, the LCD will show: "TONE".
buttons, choose the appropriate dialing mode, "TONE" or
to confirm your selection and go to the previous menu item.
to exit this menu item.

Keypad lock

.
.
.
.
shows: "RECALL".
shows: "BASE".
shows: "PAUSE".
shows: "BASE".
shows: "DIAL MODE".