– On incoming call the base unit [12] and the handset [1] will start ringing. The "In
Use" indicator [14] will flash. The LCD [2] will light and show the "EXT" symbol.
– If you phone network support the "CALLER ID" feature, LCD will show the caller's
number, and after pressing the OK [7] button – the call date and time.
1. Press the CALL button [4] to answer the call.
2. To hang up, press the CALL button [4] once again or simply place the handset [1] on
the base unit [12].
For Oval Twin XD1220 model:
1. Press the CANCEL/INT button [9].
2. Enter the handset number you are calling.
3. To hang up, press the CALL button [4] once again or simply place the handset [1] on
the base unit [12].
For Oval Twin XD1220 model:
1. During conversation, press the CANCEL/INT button [9].
2. Enter the handset number you want to transfer the call to.
3. Press the CALL button [4]. The call will be transferred and your handset will switch to
the standby mode.
4. If the handset you have transferred the call to does not answer, press the CANCEL/
INT button [9] once again to resume conversation.
This feature may be used in two ways:
1. Switching to the Speakerphone mode.
2. Using a headset.
Switching to the speakerphone mode during
1. To switch to the Speakerphone mode during conversation, press the
You do not have to hold the handset near your ear at that.
2. Press the
button [3] once again to cancel the Speakerphone mode. Now you will
have to hold the handset near your ear again.
3. To hang up, press the CALL button [4] once again or simply place the handset [1] on
the base unit [12].
Answering external calls
Internal outgoing call
Call transferring
Hands free feature
conversation
button [3].