Making Your Own Titles - Sony DCR-TRV75 Operating Instructions Manual

Making your own titles

You can make up to two titles and store them in the memory of your camcorder. Each
title can have up to 20 characters.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select TITLE in
(4) Select
(5) Select CUSTOM1 SET or CUSTOM2 SET, then press EXEC.
(6) Select a desired character. Repeat pressing a key to select a desired character
on the key.
(7) Press c to move the cursor for the next character. Repeat the same procedure
as step 6 and 7 to complete your title.
(8) Press SET. The title is stored in memory.
4
TITLE SET
CUSTOM1 SET
CUSTOM2 SET
r R
EXEC
To return to FN
Press EXIT.
To change a title you have stored
In step 5, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want
to change, then press EXEC and enter the new title as desired.
If you take five minutes or longer to enter characters during tape recording
standby with the cassette inserted in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to OFF (CHG) once and then to CAMERA again, then
start again from step 1.
We recommend setting the POWER switch to VCR or removing the cassette so that
your camcorder does not automatically turn off while you are entering title characters.
To erase the character
Press C. The last character is erased.
To enter a space
Press c.
, then press EXEC (p. 178).
, then press EXEC.
5
EXIT TITLE SET
[ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
&? !
GH I
PQR
S
RET.
or
7
EXIT
ABC DEF T t
JKL MNO 123 678
45 90
TUV WXY ' . , SET
Z –
/
.
TITLE SET EXIT
[ P A R T Y _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
&? ! ABC DEF T t
GH I JKL MNO 123 678
45 90
PQR TUV WXY ' . , SET
S Z –
/
97