Table of Contents
Advertisement
Focusing manually
To focus precisely
It is easier to focus on the subject if you adjust the zoom to shoot at the "W" (wide-
angle) position after focusing at the "T" (telephoto) position.
When you shoot close to the subject
Focus at the end of the "W" (wide-angle) position.
9 changes as follows:
Focal distance information is displayed for about three seconds on the LCD screen
in the following cases:
– When switching the focus adjustment mode from autofocus to manual
– When turning the focus ring
Focal distance information
You cannot get correct information if you have attached a conversion lens (optional) to
your camcorder.
62
when recording a distant subject
when the subject is too close to focus on
Advertisement
Table of Contents
