Table of Contents
Advertisement
Superimposing a still image in "Memory Stick" on an image
– MEMORY MIX
2
To change the still image to be superimposed
Press –/+ in the lower right corner before step 5.
To cancel MEMORY MIX
Press
Note
During recording you cannot reselect the mode. Press
When you select M. OVERLAP
You cannot change the still image or the mode.
During recording
You cannot change the mode.
Recording a superimposed image to the "Memory Stick" as a still
image
Before operation
Insert the "Memory Stick" recorded with still images into your camcorder.
The POWER switch should be set to
Operate by touching the panel.
(1) Follow the step 1 to 6 on page 117.
(2) Press PHOTO deeply to start recording.
To cancel MEMORY MIX
Press
Image size of still images
Image size is automatically set to 640 480.
To record still images as-is to the tape
Press –/+ in the lower left corner of the screen in M. LUMI mode and keep going until
the bar display on the right is full.
118
MEM MIX
OFF
MCCAM
OVER–
MEM
LUMI
LAP
M I X
CAMCM
MCCAM
CHROM
CHROM
OFF to return to PAGE2.
Recording is complete when the bar scroll indicator disappears. The image
displayed on the screen when you pressed PHOTO deeply will be recorded on
the "Memory Stick."
OFF to return to PAGE2.
OK
Still image
101
101–0001
–
+
4
MEM MIX
OFF
M. LUMI
101
–
+
–
OFF to return to PAGE2.
.
OK
101–0001
+
Advertisement
Table of Contents
