Connecting To A Wall Outlet - Sony DCR-TRV75 Operating Instructions Manual

Step 1 Preparing the power source
Note
The BATTERY INFO indicator is not displayed in the following cases:
– The battery pack is not properly installed.
– Something is wrong with the battery pack.
– The battery pack is fully discharged.
Battery Info
The number displayed as Battery Info is the approximate recording time.
While the remaining battery time is being calculated
"CALCULATING BATTERY INFO..." is displayed.

Connecting to a wall outlet

Connect in the same way as when charging the battery pack (p. 16).
PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
Notes
• The AC Adaptor can supply power from a wall outlet even if the battery pack is
attached to your camcorder.
• The DC IN jack has "source priority." This means that the battery pack cannot supply
any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.
19