Vcr Timer Recording (Standard/Vcr Plus+) - Sony RDR-VX500 Operating Instructions (RDRVX500) Operating Instructions Manual

Checking the remaining time
Press DISPLAY.
A Play mode
B Time counter
C Recording mode
D Remaining time
E Current channel
To check the remaining time of a tape, set "VCR
Function" – "Tape Length" of "Features" in the
"Setup" display correctly (page 104).
Maximum recording time
Tape Length SP
T-120 2 hrs
T-160 2 hrs 40 mins
T-180 3 hrs
Notes
• The remaining tape length may not be indicated
accurately for short tapes such as T-20 or T-30, or tapes
recorded in LP mode.
• It may take up to one minute for the VCR to calculate
and display the remaining tape length after you press
DISPLAY.
VCR Timer Recording
(Standard/VCR Plus+)
Stop
0:30:00
You can set the timer for a total of 12 programs
SP
together with DVD Timer Recording and VCR
Rem 01:30
CH 110 Timer Recording, up to one month in advance.
There are two methods to set the timer: the
standard method and VCR Plus+ method.
• Standard: Set the date, time, and channel of the
• VCR Plus+: Enter the PlusCode number
Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent the
accurate recording of a program.
Setting the timer manually
(Standard)
EP
6 hrs
8 hrs
9 hrs
program manually.
designated for each TV program (page 71).
Note
SYSTEM
MENU
[TIMER]
VIDEO
M/m/</,,
ENTER
x STOP
,continued 69