Step 3: Connecting The Audio Cords/Hdmi Cord - Sony RDR-GX380 Operating Instructions Manual

Step 3: Connecting the Audio Cords/HDMI Cord

Select one of the following patterns, A or B, according to the input jack on your TV monitor, projector,
or audio component such as an AV amplifier (receiver). This will enable you to listen to sound.
Centre
Coaxial digital
cord (not supplied)
: Signal flow
A Digital audio input jack
If your audio component has a Dolby
*2
DTS , or MPEG audio decoder and a digital
input jack, use this connection. You can enjoy
Dolby Digital (5.1ch), DTS (5.1ch), and MPEG
audio (5.1ch) surround effects.
16
[Speakers]
Rear (L)
Front (L)
to DIGITAL OUT (COAXIAL)
PCM/DTS/
MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
to AUDIO OUT (L/R)
(red)
(white)
*1
Audio component with
a decoder
or to coaxial/HDMI digital input
Audio cord (not
supplied)
B Audio L/R (left/right) input jacks
Digital, This connection will use your TV's or audio
component's two speakers for sound.
z Hint
For correct speaker location, refer to the operating
instructions supplied with the connected components.
[Speakers]
Rear (R)
Front (R)
Subwoofer
HDMI cord
(not supplied)
to HDMI OUT
HDMI OUT
DVD recorder
INPUT
L
(white)
AUDIO
R
(red)
TV, projector, or
audio component
A
B