Table of Contents
Advertisement
3.3.2
Mapping
3.3.2.1
Energy Counters from Binary Inputs
3.3.2.2
Energy Counters Calculated from Measurement Values
Formula
Power Meter, IEC 60870-5-103, Manual
E50417-B1076-C375-A4, Release 11.2012
#
Value
1
Energy counter 1
2
Energy counter 2
3
Active energy demand
4
Active energy supply
5
Reactive energy inductive
6
Reactive energy capacitve
Table 3-6
Mapping table
With the parameter "IEC 103 Settings - Counters" (see chapter 3.3.1) the user can
select, whether the energy values (table 3-6) will be transferred.
Energy Counter 1 and Energy Counter 2 count energy pulses from binary inputs via
binary input module.
For conversion of the transmitted pulses to an energy value, a factor "Energy increase
per pulse" has to be defined during parameterization of the binary input (ref. to the
SICAM P 7KG7750/55 Device Manual).
The required conversion factor for the calculation is 1837.
The following formula applies to the calculation of the energy:
×
Unom
Inom
Energy
=
----------------------------------------------------------------------------------------------------- -
U
: Voltage measuring range L-N x Transformation ratio of the voltage transformer
nom
I
:
Current measuring range x Transformation ratio of the current transformer
nom
1 h:
1 hour
1837: Conversion factor
Comment
from
binary input
from calculated mea-
surement values
×
×
1 h
Energycounter
1837
Data Mapping
133
55
no
133
56
no
133
51
no
133
53
no
133
52
no
133
54
no
205
205
205
205
205
205
37
Advertisement
Table of Contents
