Automatic High Beams (Ahb) - Toyota C-HR 2019 Quick Reference Manual

Automatic High Beams (AHB)

(1)
AHB is a safety system designed to help drivers see more of what's ahead at
nighttime and reduce glare for oncoming drivers. When enabled, AHB uses an
in-vehicle camera to help detect the headlights of oncoming vehicles and tail lights
of preceding vehicles, then automatically switches between high and low beams
as appropriate to provide the most light possible and enhance forward visibility.
pedestrians and obstacles.
Refer to a Toyota Owner's Manual for additional information on AHB operation,
settings adjustments, limitations, and precautions before attempting to use it.
The AHB indicator will come on when the headlights are turned on automatically
to indicate that the system is active.
Note: Pull the lever back toward you to turn the AHB system off.
The AHB indicator will turn off. To turn switch to "
high beam indicator "
When all of these conditions are met, high beams will be automatically turned on
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights
turned on.
• There are few street lights on the road ahead.
If any of these conditions occur, the system is designed to automatically turn off
high beams:
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights
turned on.
• There are many streetlights on the road ahead.
(2)
33