Roland Aerophone AE-10 Service Notes page 16

Oct. 2016
11. Attach the Neck while rotating it counterclockwise twice or so.
While doing this, confirm that the screw hole of the Neck matches with
the screw hole of the Rubber Cap.
fig.kumitate-24.eps
12. Secure with screws c (x 2). (Plain View (1) (p. 8), View 1)
Installing the Mouth Piece
1.
Apply the market available recorder (wind instrument) cream to the
Rubber Cap.
fig.kumitate-17.eps
2.
Insert the Mouth Piece Assy to the deepest end.
* As for the notes and how to wash the Mouth Piece, kindly refer to Maintaining
the mouthpiece in the owner's manual (p. 2).
Attaching the Tube to the Sensor Board
1.
Pick up the Tube's tip and attach it to the Sensor Board.
fig.kumitate-14.eps
2.
Confirm that the Tube's tip is firmly attached to the Sensor Board.
fig.kumitate-15.eps
16
AE-10