Fingerprint Reader Board - HP Pavilion x360 14 Series Maintenance And Service Manual

Fingerprint reader board

Table 5-12 Fingerprint reader board descriptions and part numbers
Description
Fingerprint reader board, ash silver
Fingerprint reader board, natural silver
Fingerprint reader board, luminous gold
Before removing the fingerprint reader board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the hard drive (see
Remove the fingerprint reader board:
1. Disconnect the cable from the reverse ZIF connector on the fingerprint reader board (1).
2. Remove the Phillips M2.0 × 2.0 screw (2) that secures the fingerprint reader board bracket to the
computer.
3. Slide the bracket toward the side of the computer, and then remove it (3).
4. Remove the fingerprint reader board from the computer (4).
Reverse this procedure to install the fingerprint reader board.
52 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover and Rubber Foot Kit on page
Battery on page 34).
Hard drive and hard drive cover on page
Spare part number
L51113-001
L51840-001
L51841-001
30).
31).
37).