Recorder; Changing Programme Positions Of The Recorder Using The Remote - Sony 3-293-880-11(1) Operating Instructions Manual

Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
Manufacturer
Sony
Hitachi
JVC
LG/Goldstar
Panasonic
Philips
Samsung
Sharp
Toshiba
The remote performs the following:
Buttons
TV [/1
TV 2 (volume)
+/–
TV PROG +/–
TV t (input
select)
To operate the TV/DVD button
(for SCART connections only)
The TV/DVD button switches between TV
mode and DVD mode. Press the TV/DVD
button when in stop mode or no menu
appears on the TV screen. Point your remote
at the recorder when using this button.
TV mode: switch to this when you use the
TV's tuner mainly. When you start
playback, the input source for the TV is set
to the recorder automatically.
DVD mode: switch to this when you use the
recorder's tuner mainly.
To check the current mode, press DISPLAY
(page 36).
Code number
01 (default)
24
33
76
17, 49
06, 08, 72
71
29
38
Operations
Turns your TV on or
off.
Adjusts the volume
of your TV.
Selects the
programme position
on your TV.
Switches your TV's
input source.
If you have a Sony DVD player
or more than one Sony DVD

recorder

If the supplied remote interferes with your
other Sony DVD recorder or player, set the
command mode number for this recorder
and the supplied remote to one that differs
from the other Sony DVD recorder or player
after you have completed "Step 6: Easy
Setup."
The default command mode setting for this
recorder and the supplied remote is "3
(Default setting)."
You can check the current Command Mode
in the front panel display. For details, see
page 115.
The default command mode setting for this
recorder and the supplied remote is "3
(Default setting)."
The remote does not function if different
command modes are set for the recorder
and remote. Set the same command mode.
Changing programme
positions of the recorder using
the remote
You can change programme positions of the
recorder using the number buttons.
Example: for channel 50
Press "5," "0," then press ENTER.
23