Audio Input Settings (Audio In) - Sony 3-293-880-11(1) Operating Instructions Manual

LINE 1 In
Selects a method of inputting video signals
for the LINE 1/DECODER jack. The picture
will not be clear if this setting does not
match the type of video input signal.
Video
S-Video
RGB
Decoder
NTSC on PAL TV
Sets the recorder to convert signals of the
NTSC colour system to the PAL colour
system to play NTSC discs on PAL-only
TVs. Refer to the operating instructions
supplied with your TV.
On
Off
106
Inputs video signals.
Inputs S-video signals.
Inputs RGB signals.
Select this when
connecting to an external
decoder (PAY-TV/Canal
Plus analogue decoder). If
you connect to a cable box/
satellite receiver such as
CanalSat, do not select this
option.
Plays NTSC discs on PAL-
only TVs.
Select this if the connected
TV is a multi-system
(NTSC-compatible) TV.
Audio Input Settings
(Audio In)
You can adjust the sound according to the
playback and connection conditions.
NICAM Select
For details on NICAM system, see page 45.
NICAM Normally select this
position.
Standard
Select this if the sound
from NICAM broadcasts is
not clear.
Tuner Level
If the playback sound is distorted, set this
item to "Compression." The recorder
reduces the audio output level.
This function affects the output of the
following jacks:
– LINE 2 OUT R-AUDIO-L jacks
– LINE 3 – TV jack
– LINE 1/DECODER jack
Normal Normally select this
position.
Compression
Select this when the
playback sound from the
speakers is distorted.
External Audio
Stereo Select this when
receiving stereo
programmes from
connected equipment.
Bilingual Select this when
receiving bilingual
programmes from
connected equipment.